...
Daysun Logo
Solarnova Logo

Saudi Parter

IN THIS ARTICLE

Project planning

Stop Guessing: 2 Free Tools to Design Your Off-Grid Solar Project in Minutes

Why Read This?

Most off-grid failures happen because of “Average Data” calculations.PORTA’s new free tools use real NASA winter data to ensure your remote camp never goes dark, eliminating the need to wait days for supplier quotes.

Guessing the investment

One of the biggest frustrations for site managers in Saudi Arabia is the “Black Box” of solar engineering.

You want to know if solar can power your mining camp or batching plant. But usually, you have to call a supplier, wait 3 days for a quote, and receive a complex PDF that you can’t verify.

We believe you should have the data first.

That’s why VANGE has developed two powerful, free-to-use calculation tools. Whether you already have a system in mind or are just starting with an empty roof, these tools give you engineering-grade answers in seconds.

Here is how to use them to master your energy planning.

1.The "Power Predictor" (Solar Yield Calculator)

Most people calculate solar based on “Annual Average.” This is a fatal mistake for off-grid systems. An average day might look fine, but a cloudy day in December could shut down your entire operation.

Our Solar Yield Calculator solves this by using local NASA meteorological data to simulate real-world performance.

Screenshot of the solar yield calculator interface showing a bar chart comparing daily minimum and maximum power generation across twelve months, highlighting winter versus summer differences.

What It Tells You:

Daily Minimums:

The most critical number. It tells you the lowest power generation you will see in winter. If this covers your load, you are safe.

Summer Surplus:

See exactly how much extra power you will have in July/August (perfect for running extra cooling loads).

Real World Scenario
You plan to install 200kW of solar. The tool shows that in Turaif,Saudi, this generates 1,550 kWh in July but drops to 480 kWh in December. Now you know exactly how many batteries you need to bridge that winter gap.

2.The "Project Architect" (Preliminary Diagnosis)

If you are at the very beginning of a project, you might not know if you need 50kW or 500kW. You just know you have space. This tool acts as your Instant Feasibility Consultant.

How It Works:
User interface for selecting solar installation type (rooftop or ground) and entering available area in square meters for preliminary project sizing.
Simulation results screen displaying calculated max solar capacity, estimated investment budget, and a preliminary bill of materials based on user inputs.

Why You Need It:

It eliminates the “Back-and-Forth” communication. You don’t need to ask a supplier “What can I fit here?”. You already know. It helps you set a realistic budget and checks if your available space is enough to power your loads.

Conclusion: Data is Power

In the harsh environment of Saudi Arabia, an undersized off-grid system means generator runtime and burnt fuel. An oversized system means wasted CAPEX.

Stop guessing. Use accurate data to make informed decisions.

Power Predictor

I know my capacity (kW). Show me the yield.

Project Architect

I have space (m²). Show me what fits.

Power Your Project

Get a customized technical proposal and pricing for our mobile energy solutions.

Get a Free Quote

Tell us about your requirements and we’ll build a solution.

Your information is secure and encrypted.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.